ELECTRONIC INTEGRATED SYSTEM MECHANIC - TITLE 32

📍 Louisville, Kentucky · 🏛 Air National Guard Units · 💰 $42–$49 per hour · 🎓 WG 12 · 🧭 Electronic Integrated Systems Mechanic (2610) · ⏳ Closes Dec 22, 2026 · 41 days left · 🗓 Posted Oct 22, 2026
Browse: More Air National Guard Units jobs · More Electronic Integrated Systems Mechanic jobs · Federal jobs in Kentucky

About this job

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC INTEGRATED SYSTEM MECHANIC - TITLE 32, Position Description Number PDD2325000 and is part of the KY 123 AW, National Guard.

Duties

As an ELECTRONIC INTEGRATED SYSTEM MECHANIC - TITLE 32, WG-2610-12, you will perform maintenance on multi-complex electronic integrated systems. Complete operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units. Isolate malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment. Solve complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjust and align system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Install serviceable components into aircraft and perform total systems alignment. Maintain, modify, calibrate and inspect user test, measurement, and diagnostic equipment. Install, modify, overhaul, maintain, troubleshoot, repair, rebuild, align, and calibrate complete electronic avionics multi-systems control. Review and analyze maintenance data. Align, adjust, and perform final calibrations on integrated systems. Analyze equipment failure and malfunctions and suggest changes to improve operation. Troubleshoot operational malfunctions and analyze system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, test equipment and built in system tests. Perform equipment maintenance on systems. Test and troubleshoot solid state electronic assemblies and subassemblies. Recommend methods to improve equipment performance, technical data, and maintenance procedures by reporting malfunctions, initiate material deficiency reports, and assist in design changes. Conduct aircrew debriefing to determine the nature of malfunctions. Requisition supply assets and process repairable assets. Document man-hour expenditures and maintenance actions. Conduct training on assigned systems and related support equipment. Perform other duties as assigned. A more comprehensive detailed description of the position may be found in Position Description PDD2325000 on file in the employing unit or in the Human Resources Office. Contact the KY HRO Staffing Section via email for additional information, ng.ky.kyarng.mbx.j1-hro-staff@army.mil

Qualifications

MINIMUM REQUIREMENT: Experience that demonstrates the basic knowledge of electronic theories and practices to identify, isolate and repair malfunctions in integrated systems. Experience with relative principles such as digital and analog circuits, electro-mechanical devices, solid state devices, digital techniques, synchro/servo operation and integrated circuit theory. Experience interpreting and tracing schematics, logic and wiring diagrams and using a wide variety of test, measurement, and diagnostic equipment (TMDE). SPECIALIZED EXPERIENCE: Must have at least 12 months experience installing, modifying, overhauling, maintaining, troubleshooting, repairing, aligning, calibrating, and rebuilding multi-system avionics complexes. Experience completing operational checks, inspections, tests, trouble shooting, removal and replacement of systems and components. Experience isolating malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment. Experience maintaining, modifying, calibrating, and inspecting user test, measurement, and diagnostic equipment. Experience performing installations, modifications, overhauling, maintaining, troubleshooting, repairing, rebuilding, aligning, and calibrating complete electronic avionics multi-system controls. Experience evaluating operational characteristics of integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Experience analyzing malfunctions encountered through fault codes, determining repair sequence process and performing required repairs. Experience performing alignments, adjustments, and conducting calibrations on integrated systems. FOR THE WG-13: In addition to possessing the specialized experience listed above, applicants must have at least 12 months experience working as an Electronic Integrated Systems Mechanic (WG-2610-12). EXPERIENCE REQUIREMENTS: Resume must have complete dates, work schedule, and/or hours worked per week for both civilian and military employment. (Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) Use of year only and unspecified work schedule will result in disqualification. Each applicant must fully substantiate -in their own words- that they meet 100% of the minimum requirements and specialized experience listed above in detail; otherwise, the applicant will be considered unqualified for this position. Do NOT copy and paste from the vacancy announcement or the position description. Also, make sure the applicant's name is on every document submitted, otherwise it will NOT be considered.

Education

FOR THE WG-13: Completion of at least one military professional education course program

Requirements

Military Grades: A1C/E3 - TSgt/E6 Military Requirement: FOR THE WG-12: Completion of an Air Force Three or Five Skill Level Technical Training School and awarded one of the following compatible Three or Five Skill Level AFSC: 2A031, 2A051, 2A231, 2A251, 2A335, 2A354, 2A934, 2A954 FOR THE WG-13: Completion of an Air Force Seven Skill Level Technical Training School and awarded one of the following compatible Seven Skill Level AFSC: 2A974 RANK REQUIREMENT: Member must provide in writing with their application package that they are willing to accept a reduction in rank in order to be qualified for this position, if applicable. Failure to do so will result in disqualification. CONDITIONS OF EMPLOYMENT: You must maintain membership in the Kentucky National Guard. You must be assigned to a compatible military position. Wear of the military uniform. Position may require a pre-employment physical. May be subject to furlough actions. May be required to successfully complete a trial period. Participation in direct deposit is mandatory. Must obtain and maintain a favorable adjudication of a T3 or equivalent investigation. Acceptance of a Federal position may terminate a military bonus. Acceptance of a Federal position will terminate Tricare Reserve Select (TRS) eligibility. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. Must have the capability to lift, carry, push, or otherwise handle items weighing up to 70 pounds. Must have the physical capability to stand, climb, walk, bend, crouch, reach, and stoop over extended periods of time. Must possess a valid state driver's license to operate government motor vehicles in accordance with Air Force and Air National Guard Vehicle Operations Directives. Must complete the hazmat certification within six months of employment and complete hazmat recertification every two years. This position is developmental: Incumbent may be non-competitively promoted to the next higher grade upon completion of an Individual Development Plan (IDP), award of the compatible 7-skill level AFSC, meeting time in grade requirements, and recommendation for promotion by supervisor.

Evaluations

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration. Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics): Ability to Inspect, Ability To Use Hand and Power Tools - Electronics, Ability to Use Prints and Drawings, Knowledge of Equipment Assembly, Installation, and Repair, etc., Theory of Electronics, Trouble shooting (Electronic Equipment), and Use of Test Equipment: Electronics

How to apply

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13098945 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (http://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: http://www.usajobs.gov/Help/how-to/application/status/.

Applications are handled only on the official announcement. This page is a readable copy of the public announcement data — the official version controls if anything differs.

Apply on USAJobs (official) ↗

Required documents

To apply for this position, you must submit a complete Application Package which includes: 1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) of employment and duties performed. 2. Other supporting documents: If Applicable: Proof of completion of military professional education course program

What to expect next

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.

Other information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (http://www.sss.gov/RegVer/wfRegistration.aspx).

Frequently asked questions

How much does this ELECTRONIC INTEGRATED SYSTEM MECHANIC - TITLE 32 job pay?

The announcement lists a salary of $42–$49 per hour (WG 12).

When is the last day to apply?

Applications close on Dec 22, 2026 — 41 days from today.

Where is this job located?

This position is located in Louisville, Kentucky with the Air National Guard Units.

How do I apply?

Applications are submitted through the official announcement on USAJobs. Use the Apply button on this page to go to the official posting — this site never takes applications itself.

More jobs at Air National Guard Units

All Air National Guard Units jobs →

More Electronic Integrated Systems Mechanic jobs

All Electronic Integrated Systems Mechanic jobs →

Data: USAJobs (U.S. Office of Personnel Management), retrieved 2026-11-11 · Announcement KY-13098945-AF-27-006 · Official announcement. FederalJobs is unofficial and is not affiliated with OPM or the agency.
ELECTRONIC INTEGRATED SYSTEM MECHANIC - TITLE 32
Dec 22, 2026 deadlineApply